Samsung SCW71 User Manual (user Manual) (ver.1.0) (English) - Page 50

Lighting Techniques, After Recording

Page 50 highlights

ENGLISH Advanced Recording Lighting Techniques 1 When you use your camcorder, there are only two possible recording environments. - You will be recording outdoors (Normal recording or through an ND(Neutral Density) filter). - You will be recording indoors. 1 The single greatest influence on picture quality is the level of brightness, measured in lux. 1 The following table lists a few common situations, the corresponding level of brightness and any associated recommendations. Situations x Snow-covered mountains or fields. x Sandy beach on a hot summer's day. x On a sunny day in the middle of the afternoon. x On a gloomy day, an hour after the sunrise. x Office with fluorescent lighting near to a window. x On a sunny day, an hour before the sunset. x Department store counter. x Room lit by two 30W fluorescent lights. x Arcade at night. x Candle light. Brightness (lux) 100,000 100,000 35,000 2,000 1,000 1,000 500 to 700 300 150 to 200 10 to 15 Recommendations ND filter recommended. Normal recording. _ _ After Recording 1. Eject the tape that you have recorded. (see page 25) 2. If you want to protect accidental erasure of the tape you have recorded, push the red tab on the cassette. 3. Set the POWER switch to OFF. 4. Close the LENS cover. 5. Remove the BATTERY PACK from the camcorder. 50

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66

50
ENGLISH
Advanced Recording
Lighting Techniques
1.
Eject the tape that you have recorded. (see page 25)
2.
If you want to protect accidental erasure of the tape you have recorded,
push the red tab on the cassette.
3.
Set the POWER switch to OFF.
4.
Close the LENS cover.
5.
Remove the BATTERY PACK from the camcorder.
When you use your camcorder, there are only two possible recording environments.
-
You will be recording outdoors (Normal recording or through an ND(Neutral Density) filter).
-
You will be recording indoors.
The single greatest influence on picture quality is the level of brightness, measured in lux.
The following table lists a few common situations, the corresponding level of brightness and any associated
recommendations.
Situations
Brightness (lux)
Recommendations
Snow-covered mountains or fields.
100,000
ND filter recommended.
Sandy beach on a hot summer’s day.
100,000
On a sunny day in the middle of the afternoon.
35,000
On a gloomy day, an hour after the sunrise.
2,000
Office with fluorescent lighting near
1,000
Normal recording.
to a window.
On a sunny day, an hour before the sunset.
1,000
Department store counter.
500 to 700
Room lit by two 30W fluorescent lights.
300
_
Arcade at night.
150 to 200
Candle light.
10 to 15
_
After Recording