Samsung SCX-6345N User Manual (user Manual) (ver.3.00) (English) - Page 106
Activating the added memory in the PS printer properties, Replacing the Stapler, properties
UPC - 635753610826
View all Samsung SCX-6345N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
6 Push the DIMM straight into the DIMM slot until it snaps into place. Make sure the latches fit over the notches located on either side of the DIMM. 7 Replace the control board cover. 7 Select the amount of memory you installed from Printer Memory in the Installable Options section. For Windows 98, select Installable Options > VMOption > change setting for:VMOption > change memory. 8 Click OK. Replacing the Stapler When the stapler is completely empty, the message for installing the staple cartridge appears on the display screen. 1 Open the finisher cover. 8 Reconnect the power cord and printer cable, and turn the machine on. Activating the added memory in the PS printer properties After installing the memory DIMM, you need to select it in the printer properties of the PostScript printer driver in order to use it. 1 Make sure that the PostScript printer driver is installed on your computer. For details about installing the PS printer driver, see Software section. 2 Click the Windows Start menu. 3 For Windows 98/Me/NT 4.0/2000, select Settings and then Printers. For Windows XP/2003, select Printers and Faxes. 4 Select the Samsung SCX-6x45 Series PS printer. 5 Click the right mouse button on the machine icon and select Properties. 6 For Windows 98/Me, select Device Options. For Windows NT 4.0/2000/XP/2003, select Device Settings. 2 Pull the stapler unit out. 13.2