Samsung SM-G530P User Manual - Page 282

 Timeout settings: Choose a time period, after which Hotspot will automatically turn off if there is no activity.  LAN settings: View and configure settings related to using Hotspot as a Local Area Network. • IP address: View the default IP address, or tap to enter a valid IPv4 address. • Subnet mask: View the default subnet mask, or tap to enter a subnet mask. • DHCP: Tap to enable or disable DHCP. When DHCP is enabled, your phone assigns IP addresses to devices that connect to Hotspot. • Starting IP: When DHCP is enabled, view the default starting IP address for assigning IP addresses to connecting devices, or enter a enter a valid IPv4 address. When other devices connect to your device using DHCP, the IP address your phone assigns will be between the Starting IP and Ending IP. • Ending IP: When DHCP is enabled, view the default ending IP address for assigning IP addresses to connecting devices, or enter a enter a valid IPv4 address. When other devices connect to your device using DHCP, the IP address your phone assigns will be between the Starting IP and Ending IP. • Lease time: When DHCP is enabled, set a length of time a connected device may use an assigned IP address. • Maximum DHCP users: When DHCP is enabled, set the maximum number of devices allowed to connect to Hotspot. Allowed Devices Control whether devices can connect to Hotspot with the Allowed devices list. After you add devices to the list, they can scan for your phone and connect using your phone's Hotspot name and password. Note: Using Hotspot consumes battery power and uses data services. 1. From home, tap Apps > Settings . Settings 273