Samsung SMT-190DN User Manual - Page 12

SMT-171/SMT-190-ENG 12/8/05 9:40 AM Page 12 USER'S MANUAL D-SUB Connector Pin Assignments PIN ASSIGNMENTS Pin No. Pin Name Pin No. Pin Name 1 RED VIDEO E 2 GREEN VIDEO 9 NC 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H.SYNC(or H+V SYNC) 6 RED GROUND 14 V-SYNC 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND D-SUB Troubleshooting Guide WEEE Symbols Troubleshooting Troubleshooting Tip 1. Make sure if the power supply is connected properly. The screen doesn't show up. 2. Turn on the power. 3. Select the input signal right for the connected port. The screen is too light or too dark. Control the brightness. The screen size is not fit for Press the AUTO button among buttons in the the VGA signal. front. (It is used only in the VGA signal.) The screen color shows strange in the VGA signal. In the Setup menu of OSD menu, perform the Auto Adjustment. Correct Disposal of This Product (Waste Electrical &Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature,indicates that it should not be disposed with other household wastes at the end of its working life.To prevent possible harm to the environment or human health from uncontrolled waste disposal,please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product,or their local government office,for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract.This product should not be mixed with other commercial wastes for disposal. - 12 -