Samsung SRD-830D User Manual - Page 14
MONITOR, Using the Numeric buttons, Changing the Remote Control ID
View all Samsung SRD-830D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
overview MONITOR Available after switching to Monitor mode by pressing the [MONITOR] button on the remote control. AUTO Selects the screen status automatically. ID RESET Initializes the ID value to 00. P.MODE Selects the screen mode. POWER Turns the monitor power on/off. MONITOR Activates the monitor function. NUMBER [0~9] Changes the system ID. ID Sets the ID. Select 2 digits from 0 ~ 9 while pressing the ID Key. +/- Adjusts the audio volume. MENU Displays the Setup Menu. Up/Down/Left/Right ENTER Moves the cursor up/down/left/right, and runs the Select Menu. FREEZE Screen Freeze. UNDER SCAN Displays the video screen within a screen. MUTE Mutes the audio out. SOURCE Selects the input signal source. PIP Selects or deselects the PIP function. Using the Numeric buttons CHANNEL 1-9 Press any button among 1 to 9. Changing the Remote Control ID 1. Press the ID button of the remote control and check the ID displayed on the DVR screen. The factory default ID of the remote control is 00. 2. Enter 2 digits of your selection in order, while pressing the system [ID] button. 3. When ID input is done, press the system [ID] button again to check the setting. M If you want to change the remote control ID to 08: Press 0 and 8 in order while the system [ID] button is pressed. Remote control's ID and DVR's ID should be matched for proper operation. Refer to "Remote Devices". (Page 50) 14_ overview