Samsung SRD-830D User Manual - Page 46
Setting The Device
View all Samsung SRD-830D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
using the DVR SETTING THE DEVICE You can setup Camera, Storage Device, Remote Device, POS Device and Monitor. Camera Setting the Camera You can set Video, Audio, Channel Name and Dwell Time of a Camera. Using the mouse may help make setup easier. 1. Press the [MENU] button on the remote control or front panel. 2. Use the left/right button (◄ ►) to select . Device setting menu is selected. 3. Use the up/down buttons () to move to , and press [ENTER] button. Device Camera Storage Device Remote Device POS Device Monitor Logout Exit 4. Select . You will see a window where you can configure the camera settings including Video, Audio, Channel Name, Dwell Time and Progressive. 5. Use direction buttons to move to a desired item, and set the value. • Video - : You can turn ON/OFF the selected channel's camera. Camera Camera PTZ CH Video Audio CH Name 1 ON OFF CAM 01 2 ON OFF CAM 02 3 ON OFF CAM 03 4 ON OFF CAM 04 5 ON OFF CAM 05 6 ON OFF CAM 06 7 ON OFF CAM 07 8 ON OFF CAM 08 Screen Setup SEQ-Dwell Time Progressive 5 sec OFF 5 sec OFF 5 sec OFF 5 sec OFF 5 sec OFF 5 sec OFF 5 sec OFF 5 sec OFF Previous/Next Page OK Cancel - : Shows information other than the video of the selected channel. For privacy protection, it does not display the video while the recording continues. - : Shows nothing but an empty screen while the recording continues. • Audio - If set to , you can turn the audio of the channel ON/OFF on the Live screen. - If set to , the channel's audio is off on the Live screen and not recorded. Audio output is available for only 1 channel. M SRD-830/830D/830DC/1610/1610D/1610DC/1630/1630D/1630DC supports 1~4 channels of sound inputs. • CH Name : Up to 15 characters including blanks are allowed. (The first character should not be empty.) Refer to "Using Virtual Keyboard". (Page 38) • SEQ-Dwell Time : You can set the dwell time between channels for the Live screen and Spot Out. If set to , the channel is not listed in the Auto Sequence mode. 46_ using the DVR