Samsung SRD-830D User Manual - Page 56

using the DVR Setting Event Recording Properties You can set each channel's resolution, quality and IPS for event recordings. Using the mouse may help make setup easier. 1. Use the up/down buttons () in window to move to , and press [ENTER] button. REC Quality & Resolution Standard Event Remaining count : 4CIF(L) : 0 2CIF(M) : 0 CIF(S) : 0 2. Select . Event recording setup window appears. 3. Use direction buttons to move to a desired item, and select it. CH Resolution  Record Rate  Record Quality  1 CIF(S)  7.5ips  Level4  2 CIF(S)  7.5ips  Level4  3 CIF(S)  7.5ips  Level4  4 CIF(S)  7.5ips  Level4  5 CIF(S)  7.5ips  Level4  6 CIF(S)  7.5ips  Level4  7 CIF(S)  7.5ips  Level4  8 CIF(S)  7.5ips  Level4  • Resolution : Sets the resolution of the recorded screen. Previous/Next Page  If you set the resolution to , SRD-850/850D/850DC/ OK Cancel 1650/1650D/1650DC support up to 4 channels while SRD-1630/1630D/1630DC support up to 2 channels and SRD-830/830D/830DC/1610/1610D/1610DC support just one channel. • Record Rate : Image Per Second, means the frames recorded per a second. • Record Quality : Sets the recording quality. M  The remaining rate for each channel displayed in DVR is a sum of frame rates in both standard recording and event recording.  You cannot increase the remaining count if the current remaining count has reached zero or there is no available remaining count from any other page. If this is the case, reduce the remaining count for the current page, or do so for the same channel on any other page.  Only if the resolution is set to 4CIF, you can select Level 9 for the recording quality.  If you select level 9 for model SRD-1670/1670D/1670DC, the model may not support the maximum frame rate for 4CIF. (This is because SRD-1670/1670D/1670DC calculates the remaining rate as double of the specifi ed frame rate if selecting level 9.) 4. When the Event recording setup is done, press . Record Option You can set the recording to stop or overwrite when the HDD is full. Using the mouse may help make setup easier. 1. Use the up/down buttons () in window to move to , and press [ENTER] button. Record Option 2. Use direction buttons to move to a desired item, and set the value. • Disk End Mode : If selected , recording will continue despite the HDD full while overwriting the oldest. If selected , the recording will stop when the HDD is  Disk End Mode Overwrite Disk End Beep  Auto Delete Auto Delete 180 day The recording information will be deleted. Do you want to proceed? OK Cancel full. • Disk End Beep : If selected , the button is activated. If you check it, the beep will sound on the disk full and the OK Cancel recording stops. • Auto Delete : If you check it, Record Period setup is activated. If you specify the auto deletion period, the recording data before the period will be deleted automatically. (This option will be enabled only if Disk End Mode is set to "Overwrite".) 3. When the recording option setup is done, press . 56_ using the DVR