Samsung WA52M7750AV/A4 User Manual - Page 25
STEP 4, Leveling your washer
View all Samsung WA52M7750AV/A4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Installation * A STEP 4 Leveling your washer A NOTE Connect the hose guide (A) within 3~5 in (7.6~12.7 cm)* from the end of the drain hose. If the drain hose is extended beyond the end of the hose guide, mold or microorganisms could spread inside the washer. NOTE The drain hose can be installed to a 96 in (245 cm) maximum, but the draining capability can be reduced at this height. It can cause the washer to have an odor because of remaining water in the drain system. NOTE If the drain hose is installed below 39 in (99 cm), water can be drained in cycles due to a siphon phenomenon. It causes the washer to display "4C". See if the washer is level by checking the position of the tub: 1. Slide the washer into position. 2. Open the lid of the washer, and pour the water into the tub to just below the pulsator level. NOTE WA52M7750A* models have the Built-in sink over the pulsator level. That's why the level is not revealed. Open the Built-in sink and check the level with eyes. WA7700M_DC68-03774D-04_EN.indd 25 English 25 2019-02-14 6:24:08