Samsung WF405ATPASU/AA User Manual Ver.1.0 (English, French, Spanish) - Page 31

04 maintaining your washer PURE CYCLE™ Pure Cycle is a self-cleaning cycle that removes mold that may occur inside the washing machine. 1. Press the Power button. 2. Press the Pure Cycle™ button. • Once the Pure Cycle button is pressed, the only function that can be set is Delay Start. 3. Press the Start/Pause button. • When you press the Start/Pause button, Pure Cycle begins. • • CAUTION • Using Pure Cycle, you can clean the drum without using a cleansing agent. Never use Pure Cycle when laundry is in the washing machine. It may cause damage to the laundry or a problem with the washing machine. If you want to use a drum cleansing agent, use only 1/10 of the amount of the drum cleansing agent recommended by the cleansing agent manufacturer. (When using a powder-type cleansing agent , remove the liquid detergent compartment.) The Pure Cycle Auto Indicator Function • If the "Pure Cycle" button is lit after a wash, it indicates that tub (drum) cleaning is required. In this case, remove the laundry from the washing machine, turn the power on, and clean the drum by running Pure Cycle. • If you do not run Pure Cycle, the "Pure Cycle" indicator turns off. However, the "Pure Cycle" indicator will light again after two washes. Not running Pure Cycle at this point will not cause a problem with the washing machine. • Although the Pure Cycle Auto Indicator appears once a month or so, the frequency may differ depending on the number of times the washing machine is used. WF405ATPA-03145A-02_EN.indd 31 maintaining your washer _31 2012-03-12 3:07:29