Sanyo 12KS71 Installation Instructions - Page 23
Remote Control Unit Installation Position - not cold
View all Sanyo 12KS71 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
05-424 KS0971-1271 12/13/05 1:28 PM Page 23 7. Remote Control Unit Installation Position The remote control unit can be operated from either a non-fixed position or a wall-mounted position. To ensure that the air conditioner operates correctly, do not install the remote control unit in the following places: q In direct sunlight q Behind a curtain or other place where it is covered q More than 26' (8 m) away from the air conditioner q In the path of the air conditioner's airstream q Where it may become extremely hot or cold q Where it may be subject to electrical or magnetic interference q Where there is an obstacle between the remote con- trol unit and the air conditioner (since a check signal is sent from the remote control unit every 5 minutes) 7-1. Mounting on a Wall Before mounting the remote control unit, press the ON/OFF operation button at the mounting location to make sure that the air conditioner operates from that location. The indoor unit should make a beeping sound to indicate that it has received the signal. Remote control unit mount Rear side Mounting screws 5/32 × 5/8" (4 × 16 mm) (Included) Press Set in place Hole To prevent loss of the remote control unit, you can connect the remote control unit to the mount by passing a string through the remote control unit and attachment hole. To take out the remote control unit, pull it forward. Fig. 61 23