Sanyo CLT2054 Owners Manual - Page 16

Helpful Hints (Problems/Solutions) Before calling for assistance, please check the condition that most closely resembles your problem in the following chart, then try the solutions for that condition. Visit our Web site at www.sanyoctv.com or call toll free 1-800-877-5032. Problem TV turns off automatically. No picture, poor picture or wavy lines in picture. No sound, poor. No sound on some channels. Picture too Bright or too Dark. Check these Conditions • Check signal (Cable/Ant.) connection. • Power surge protection feature. • Check AC Adaptor and Cord. • Check antenna/external equipment connections. • May be station trouble, NO signal broadcast. • Brightness or Contrast misadjusted. • Possible interference from household appliance. • May be station trouble. • May be MUTE function is on. • Check Audio/Video connections. • Check backlight (power energy saving) settings. Try these Solutions • Press POWER key. • The sleep timer may have been set. • Unplug TV momentarily. • Adjust antenna. • Try a different channel. • Press RESET key or restart channel search. • Turn off Mixer, Drill, Blender, etc. • Try a different channel. • Adjust volume. • Select Set-up Menu to set Back Light option to Middle setting. Page No. 5 6, 11 8~9, 11 13 Cannot display picture on a full screen. No Captioning. Poor Color or no color. Blue Screen with Video1, Video2, or Component3 displayed. No TV Stereo or SAP Sound. Cannot select or scan some channels. Remote Control will not work TV. Menu words seem misspelled. Cabinet makes popping sound. • Check if Aspect Ratio setting is 16:9. • Check if station is broadcasting a Closed-Caption signal. Select another channel. • Check if program is in color. • Check antenna/external equipment connections. • Color or Tint misadjusted. • May be station trouble. • Check Audio/Video connections. • Check external equipment connections. • Check external equipment setting. • Check DVD setting. • Check if station is broadcasting a true MTS stereo signal or a SAP signal. • Channel may be removed from memory. • Check antenna connections. • V-Guide is set to block programming. • Check batteries; see if TV is plugged in. • Maybe a different language is selected. • This is a normal condition during warmup and cool down of the plastic cabinet parts. • Select Set-up Menu to set Aspect Ratio option 13 to 4:3 normal setting. • Press CAPTION key to select Captioning. 13 • Try a different channel. 11 • Adjust antenna. • Press RESET key to restart channel search. • Press INPUT key. • Switch on external equipment. • Set external equipment output connections to match input connections. • Select Sound Menu to select Stereo or SAP from Audio option. • Select CH. Scan Memory and manually add channels or start CH. (channel) search. • Turn V-Guide to OFF or press RESET key to clear all settings. • Check external equipment. • Replace batteries. • Aim remote control at front of TV. • Reselect menu language choice using the onscreen menu. 8 ~ 10 12 12 14~15 10 13 16 Helpful Hints (Problems/Solutions)