Sanyo CLT2054 Owners Manual - Page 5

Getting Started Positioning the LCD TV Always use an appropriate table or stand when positioning your TV. Allow enough space to tilt the TV. For best viewing, avoid locating the TV where direct sunlight or indoor lighting will fall on the screen. (Note: CLT1554 measurements are in the parenthesis.) 603.8 76.7 (500.2) (74.5) 388.8 (304) 413.2 (328.4) AS 262.0 (262.0) 24.4 (24.4) 184.0 (184.0) Using the Detachable TV Tilt Stand To change the viewing angle of your LCD TV, position your hand on the top and hold the stand firmly, then tilt the LCD screen forward or backward. CAUTION: Do not position hand under the screen while tilting the TV forward. 10º 5º Note: Maximum tilt is 5º to the front and 10º to the back. Power Connection ❶ Insert AC Adaptor into the DC input terminal on the TV. ❷ Insert AC power cord into Adaptor; then insert the plug fully into a 120V, 60Hz, AC power outlet. AV2 AV1 S-VIDEO V V L (MONO) R L (MONO) R AV3 Y L Pb R Pr DC IN TUNER POWER VHF (DC IN 19V) UHF CATV DC IN POWER (DC IN 19V) BACK OF TV DC POWER INPUT TERMINAL ❶ ❷ POWER OUTLET [HOUSEHOLD] AC ADAPTOR ❷ AC CORD Removing the TV Tilt Stand Tools Needed: Phillips screwdriver Important Note: Position TV face down on a padded or cushioned surface to protect the screen and finish. 1. Remove the screw from the stand back cover. 2. Remove four (4) screws from the metal bracket. CAUTION: Hold the stand firmly as you remove the last screw. 3. Carefully remove the TV stand. Positioning LCD, Using Tilt, Removing Stand, and Power Connection 5