Sanyo DRW500 Instruction Manual - Page 11

Example: Connecting a Cable Box This unit can receive all unscrambled cable channels without the use of a cable box. If you wish to view and record scrambled cable channels, you must connect a cable box as described below. Your local cable TV company will advise you of the channels available in your area. We recommend that you consult your cable TV company to make sure that the cable is properly connected. Example: Connecting a cable box with many scrambled channels Use this connection if your cable system scrambles all or most channels. Connect the cable box to the unit first. Example: Connecting a cable box with only a few scrambled channels Use this connection if your cable system scrambles only a few channels. Connect the cable box between the unit and the TV. Notes: • The unit and TV receive the same channel. Be sure that the cable box is turned on. • Recording one channel while watching another channel is not possible. Notes: • You can record any non-scrambled channel by selecting the channel on the unit. • You cannot record scrambled channels that require a cable box. Cable box (not supplied) CATV 75-ohm coaxial antenna cable (not supplied) DVD recorder (Partial back panel) 3 4 ANTENNA IN OUT VIDEO AV 1 IN L S-VIDEO R AUDIO RF OUTPUT CHANNEL RF OUTPUT CHANNEL DVD recorder (Partial back panel) CATV 75-ohm coaxial antenna cable (not supplied) 3 4 ANTENNA IN OUT VIDEO AV 1 IN L S-VIDEO R AUDIO Cable box (not supplied) 75-ohm coaxial antenna cable (supplied) TO TV ANT. IN TV VHF/UHF ANTENNA IN VHF/UHF ANTENNA IN TV 75-ohm coaxial antenna cable (supplied) 75-ohm coaxial antenna cable (not supplied) -E10- Need help? Call 1-800-813-3435