Sanyo DRW500 Instruction Manual - Page 14

Example: Connecting to an Amplifier with Dolby Digital Decoder or DTS Decoder Connect the audio cable and/or coaxial digital cable or optical digital cable. To digital audio input or Amplifier with Dolby Digital Decoder or DTS Decoder *Optical digital cable (not supplied) *Coaxial digital cable (not supplied) or To Optical DIGITAL AUDIO OUT jack To Coaxial DIGITAL AUDIO OUT jack VIDEO OUT L S-VIDEO DVD recorder (Partial back panel) R DIGITAL AUDIO AUDIO Front left speaker Surround left speaker Center speaker Front right speaker Subwoofer Surround right speaker Before connecting, remove the protective cap from the jack. Replace the cover when the jack is not in use. *Please consult your local audio/video dealer. To enjoy Dolby Digital or DTS sound Set "Digital Out" to "ON" in "Audio Setup" screen. See page E31. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. Example: Connecting to an Amplifier with Dolby Pro Logic Decoder To AUDIO INPUT jacks Amplifier with Dolby Pro Logic Decoder *Audio cable (not supplied) DVD recorder (Partial back panel) To AUDIO OUT jacks COMPONENT VIDEO OUT VIDEO OUT L S-VIDEO R DIGITAL AUDIO AUDIO Front left speaker Surround left speaker Center speaker Front right speaker Subwoofer Surround right speaker Note: Please refer to your amplifier instruction manual. *Please consult your local audio/video dealer. -E13-