Sanyo ECD-T1820 Operating Instructions - Page 16
Clock, Display Mode Change, Adjusting The Time, Clock Reset
![]() |
View all Sanyo ECD-T1820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
CLOCK 32 41 DISPLAY MODE CHANGE 1 The display on the unit can be changed by pressing CLK button . Press the CLK button to switch between the clock and audio display. When a radio, tape and CD function is performed while the time display is selected, the audio display will appear for 5 seconds, then the display will return to the time mode. ADJUSTING THE TIME 1, 2, 3 To adjust the time, press the CLK button for more than 2 seconds. The time display blinks. To adjust the minute, press the button . To adjust the hour, press the button . To advance the time rapidly, hold the or button continuously. Press CLK button again to start the clock. CLOCK RESET 1, 4 Press CLK button for more than 2 seconds and the time display blinks. While blinking, press preset button 6 to skip to the nearest half-hour as follows: Example: 3:00 - 3:29 3:00 3:30 - 3:59 4:00 Notes • This unit uses a 12-hour clock. • The clock function and radio presets are retained in memory when the audio is switched off. -15-
![](/manual_guide/products/sanyo-ecdt1820-operating-instructions-e6d6cd4/16.png)