Sanyo ECD-T1820 Operating Instructions - Page 19
Accessories And Hardware, Installation
![]() |
View all Sanyo ECD-T1820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ACCESSORIES AND HARDWARE Mounting Bracket (Half Sleeve) x 1 Rear Strap (Brace) x 1 Screw M5 x 14 x 1 Hex bolt M5 x 8 x1 Removable Trim Ring x 1 Unlock Levers x 2 INSTALLATION 1. BEFORE INSTALLATION When mounting the unit in a car, keep the unit as level as possible. If the unit must be mounted at an angle, due to the design of the vehicle, make sure the unit does not tilt by more than 30°. Screw M2 x 8 x 1 -18-
![](/manual_guide/products/sanyo-ecdt1820-operating-instructions-e6d6cd4/19.png)
-18-
ACCESSORIES AND HARDWARE
INSTALLATION
1. BEFORE INSTALLATION
When mounting the unit in a car, keep the unit as level as possible.
If the unit must be mounted at an angle, due to the design of the
vehicle, make sure the unit does not tilt by more than 30°.
Mounting Bracket
(Half Sleeve) x 1
Rear Strap
(Brace) x 1
Screw M5 x 14
x 1
Hex bolt M5 x 8
x1
Removable Trim Ring
x 1
Unlock Levers
x 2
Screw M2 x 8
x 1