Sanyo ICR-XPS01M Instruction Manual - Page 24

About backlight of buttons/touch panel, LED NAV BACKLIGHT

Page 24 highlights

About backlight of buttons/touch panel If the "LED NAV" setting is "ON", a backlight of buttons/touch panel turns on in response to the state of the unit such as recording, playback, or FM radio. Only the area that can be operated on lights up. When the backlight of a button turns on, press to use it. Similarly, when the backlight of an area on the touch panel turns on, gently tap the area to use it. LED NAV (page 152) (Example: Screen and buttons/touch panel during recording when MIC ALC is turned on) Buttons or areas on touch panel that can be used light up During recording when MIC ALC is turned on Backlight of buttons/ touch panel If the "BACKLIGHT" setting is changed, the LCD display and the touch panel's backlight may go off after the setting. While the touch panel's backlight is off, tapping the touch panel once turns it back on so that you can operate the touch panel again. If the "BACKLIGHT" setting is "OFF", both the screen and the touch panel dim after 30 seconds. If you want to check the unit, tap the touch panel once. BACKLIGHT (page 151) 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182

24
About backlight of buttons/touch panel
If the “LED NAV” setting is “ON”, a backlight of buttons/touch panel turns on in response
to the state of the unit such as recording, playback, or FM radio. Only the area that can be
operated on lights up. When the backlight of a button turns on, press to use it. Similarly,
when the backlight of an area on the touch panel turns on, gently tap the area to use it.
LED NAV (page 152)
During recording when
MIC ALC is turned on
Backlight of buttons/
touch panel
Buttons or areas on touch panel
that can be used light up
(Example: Screen and buttons/touch panel during recording when MIC ALC is turned on)
If the “BACKLIGHT” setting is changed, the LCD display and the touch panel’s backlight may
go off after the setting. While the touch panel’s backlight is off, tapping the touch panel once
turns it back on so that you can operate the touch panel again.
If the “BACKLIGHT” setting is “OFF”, both the screen and the touch panel dim after 30
seconds. If you want to check the unit, tap the touch panel once.
BACKLIGHT (page 151)