Sanyo ICR-XPS01M Instruction Manual - Page 70

6 Tap +/- to select "ON" or "OFF", and then tap . OFF: Do not set up auto divide. ON (Auto Stop): The auto divide function activates when no sound is detected for two seconds. When no sound is detected for more than two seconds, the unit pauses; when sound is detected again, recording resumes. When there is no sound for more than 15 seconds, recording ends. ON (Manual Stop): The auto divide function activates when no sound is detected for two seconds. When no sound is detected for more than two seconds, the unit pauses; when sound is detected again, recording resumes. Even when there is no sound for more than 15 seconds, the unit still pauses; recording does not end until you press the STOP button (…). • ON (Auto Stop) is good for line-in recording from a CD. ON (Manual Stop) is good for line-in recording from a cassette tape; even if there is no sound for more than 15 seconds when you change the tape from side A to side B, the unit will pause. • The auto divide function may not work in the following cases: CD live album where silence is less than 2 seconds, or where silence cannot be detected when recording from a cassette tape with intense noise or motor sound. Tap MENU to exit the menu. * When the auto divide function is "ON", 70 appears on the screen.