Sanyo ICR-XPS01M Instruction Manual - Page 65
Tap -., to select a frequency band, you want to change., frequency band.
![]() |
UPC - 086483077685
View all Sanyo ICR-XPS01M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
2 Tap -. The 150Hz frequency band is highlighted and selected. 3 Tap / to select a frequency band you want to change. The selected frequency band is highlighted. • The following frequency bands are available: 150Hz, 500Hz, 1kHz, 4kHz, and 12kHz. 4 Tap +/- to change the level of the selected frequency band. You can change the level from -12dB to 12dB (25 increments), with each increment being 1dB. The larger the dB number, the stronger it becomes. • Tapping + increases the level. • Tapping - decreases the level. • To modify another frequency band, repeat steps 3 and 4 . • While making changes, if you want to cancel the operation, press the STOP button ( ). The screen in step 1 returns. 65
![](/manual_guide/products/sanyo-icrxps01m-instruction-manual-9ae1cc0/65.png)
65
2
Tap –.
The 150Hz frequency band is highlighted and
selected.
3
Tap
/
to select a frequency band
you want to change.
The selected frequency band is highlighted.
•
The following frequency bands are available:
150Hz, 500Hz, 1kHz, 4kHz, and 12kHz.
4
Tap +/– to change the level of the selected
frequency band.
You can change the level from –12dB to 12dB (25
increments), with each increment being 1dB. The
larger the dB number, the stronger it becomes.
•
Tapping + increases the level.
•
Tapping – decreases the level.
•
To modify another frequency band, repeat steps
3
and
4
.
•
While making changes, if you want to cancel
the operation, press the STOP button (
). The
screen in step
1
returns.