Sanyo ICR-XPS01M Instruction Manual - Page 60

MIC SENS. LED SETTING right and the LED light does not flash quickly

Page 60 highlights

• In the range where the LED light does not come on quickly, try as much as possible to increase the recording level (level meters extending to the right) by tapping so that you can collect more sound. If the recording level is too low • If the LED light flashes quickly, tap to slightly lower the recording level until the LED light goes off. • If the LED still lights after you have dropped the recording level to 1, change the "MIC SENS." setting to "LOW". If the level meter does not reach an appropriate recording level after you have increased the recording level to 30, change the "MIC SENS." setting to "HIGH". MIC SENS. (page 133) • An appropriate recording level is achieved when the level meters do not extend to the far right and the LED light does not flash quickly even after you increase the sound you want to record to its maximum. • Generally speaking, we recommend that you adjust the level to around -6. If the LED light flashes quickly, this indicates the input level is too high and distorted sound will be recorded. * If the LED light menu is set to "OFF", the LED light does not come on. LED SETTING (page 150) -&%MJHIU If the recording level is too high Appropriate recording level 60

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182

60
In the range where the LED light does not
come on quickly, try as much as possible to
increase the recording level (level meters
extending to the right) by tapping
so that
you can collect more sound.
If the LED light flashes quickly, tap
to
slightly lower the recording level until the LED
light goes off.
If the LED still lights after you have dropped
the recording level to 1, change the “MIC
SENS.” setting to “LOW”.
If the level meter does not reach an
appropriate recording level after you have
increased the recording level to 30, change
the “MIC SENS.” setting to “HIGH”.
MIC SENS. (page 133)
An appropriate recording level is achieved
when the level meters do not extend to the far
right and the LED light does not flash quickly
even after you increase the sound you want to
record to its maximum.
Generally speaking, we recommend that you
adjust the level to around -6. If the LED light
flashes quickly, this indicates the input level is
too high and distorted sound will be recorded.
*
If the LED light menu is set to “OFF”, the LED
light does not come on.
LED SETTING (page 150)
If the recording
level is too low
If the recording
level is too low
If the recording
level is too high
If the recording
level is too high
Appropriate
recording level
Appropriate
recording level
LED light
LED light