Sanyo PDG-DWL2500 Owners Manual - Page 28

Basic Operation Remote Control Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. COMPUTER 1, COMPUTER 2, HDMI buttons VIDEO, S-VIDEO, COMPONENT buttons Press the COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and COMPONENT buttons on the remote control to select the input source. See pages 30-31, 41-42 for details. FREEZE buton Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel the Freeze function, press the FREEZE button again or press any other button. Fig.1 will appear on the Screen menu while the Freeze function is working. Fig.1 4Note: When use the MUTE button to release the Freeze function, the mute function can not be operated at the same time. INFO. button Display the input source information: Input, H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp counter, Power management, Key lock, PIN code lock, Remote control and SERIAL NO.. (p.63) Remote Control COMPUTER 1/2 buttons VIDEO button FREEZE button D.ZOOM buttons HDMI button S-VIDEO button COMPONENT button INFO. button LAMP button 3D button 4Note: See the next page for the description of other buttons. D.ZOOM ed buttons Press the D.ZOOM edbuttons on the remote control to enter to the D. zoom +/- mode. See page 39 for details. LAMP button Press the LAMP button on the remote control to select the lamp mode for changing the brightness on the screen. Normal....... Normal brightness. Eco Lower brightness reduces the lamp power consumption and extends the lamp life. 3D button Select 3D mode from 3D Off, 3D (Sync. 1) and 3D (Sync. 2) (p.48-49) 28