Sanyo PDG-DWL2500 Owners Manual - Page 58

Setting Closed caption Closed Caption is a function that displays the audio portion of a TV program as text on the screen. If the input signal contains Closed captions, you can turn on the feature and switch the channels. Press the Point ed buttons to select Off, CC1, CC2, CC3 or CC4. If the Closed caption is not clear, you can change the text from Color to White. 4Note: The Closed caption is available only under the situation below. • The input signal is NTSC of composite video or S-video. • The item of Closed caption is displayed in gray while it is not available. • The Closed caption is unavailable when On-Screen Menu or P-Timer is displayed. Closed caption Lamp control This function allows you to change brightness of the screen. Normal....... Normal brightness. Eco Lower brightness reduces the lamp power consumption and extends the lamp life. Remote control This projector provides two different remote control codes: the factory-set initial code (Code 1) and the secondary code (Code 2). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. When operating the projector in Code 2, both the projector and the remote control must be switched to Code 2. To change the code for the projector: Select either Code 1 or Code 2 in this Setting Menu. To change the code for the remote control: Press and hold both the MENU and IMAGE buttons together for 5 seconds or more. After changing the code, make sure the remote control operates properly. 4Note: • When different codes are set on the projector and on the remote control, any operation cannot be made. In that case, switch the code on the remote control to fit the code on the projector. • If the batteries are removed from the remote control for a long period of time, the remote control code will be reset. 58 Press the Point ed buttons to select Off, CC1, CC2, CC3 or CC4, and then Press Select button. Remote control