Sanyo PDG-DWL2500 Owners Manual - Page 76

Appendix When the input signal is digital from HDMI terminal, refer to the chart below. ON-SCREEN DISPLAY D-VGA D-480i D-480i D-480p D-480p D-480p D-575i D-575i D-575p D-575p D-SVGA D-SVGA D-XGA D-XGA D-WXGA 3 D-WXGA 6 D-WXGA 7 D-WXGA 8 D-WXGA 9 D-WXGA 10 D-WXGA 11 D-WXGA 13 D-WXGA 14 D-WXGA 15 D-SXGA 1 D-SXGA 2 RESOLUTION 640x480 720x480 i 720x480 i 720x480 720x480 720x480 720x575 i 720x575 i 720x575 720x575 800x600 800x600 1024x768 1024x768 1376x768 1280x768 1280x768 1280x768 1280x800 1280x800 1280x800 1360x768 1280x768 1280x800 1280x1024 1280x1024 H-FREQ. V-FREQ. 3D [kHz] [Hz] DIPLAY 31.470 59.940 4 15.734 59.94/60 4 - 119.98/120 4 31.470 59.880 4 - 59.94/60 4 62.940 119.98/120 4 50.00 4 100.00 4 31.250 50.000 4 62.500 100.00 4 37.879 60.320 4 76.300 120.000 4 43.363 60.000 4 97.550 120.000 4 48.360 60.000 4 47.776 59.870 4 60.289 74.893 - 68.633 84.837 - 49.600 60.050 4 41.200 50.000 4 49.702 59.810 4 97.533 119.970 4 97.396 119.800 4 101.563 119.910 4 63.980 60.020 4 60.276 58.069 - ON-SCREEN RESOLUTION H-FREQ. V-FREQ. 3D DISPLAY [kHz] [Hz] DIPLAY D-SXGA+ 2 1400x1050 65.350 60.120 - D-SXGA+ 3 1400x1050 65.120 59.900 - D-SXGA+ 5 1400x1050 62.500 58.600 4 D-SXGA+ 6 1400x1050 64.744 59.948 4 D-SXGA+ 7 1400x1050 65.317 59.978 4 D-UXGA 1 1600x1200 75.000 60.000 4 D-WUXGA 2 1920 x 1200 74.038 59.950 - D-WSXGA+ 1 1680 x 1050 65.290 59.954 - D-WXGA+ 1 1440 x 900 55.935 59.887 4 D-720p 1280x720 45.000 59.94/60 4 D-720p 1280x720 37.500 50.000 4 D-720p 1280x720 90.000 119.98/120 4 D-720p 1280x720 75.000 100.00 4 D-1080i 1920x1080 i 33.750 59.94/60 4 D-1080i 1920x1080 i 28.125 50.000 4 D-1080i 1920x1080 i 67.500 119.98/120 4 D-1080i 1920x1080 i 56.200 100 4 D-1080p 1920x1080 33.750 30.000 - D-1080p 1920x1080 28.125 25.000 - D-1080p 1920x1080 27.000 24.000 - D-1080p 1920x1080 67.500 59.94/60 - D-1080p 1920x1080 56.250 50.000 - 4Note: • The mark "4" indicates that the 3D image can be projected. • Alphabet letter "i" placed beside some of the resolutions represents interlace signal. • The specifications are subject to change without notice. • Depending on your PC settings, the digital signals of your PC may not be projected correctly. In such a case, confirm your PC settings. • When you project a DVI signal, connect the cables, turn the projector on, then select the input. Finally, turn on your PC. Be sure to follow this procedure, otherwise an image may not be projected on the screen. If an image is not projected correctly, restart your PC. • Do not disconnect the cable while the projector is running. If the cable has been disconnected and then reconnected, an image may not be correctly projected. 76