Sanyo PDG-DWL2500 Owners Manual - Page 45

Video Input Sharpness Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15). Gamma Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (Default, 1.8, 2.0, 2.2, 2.4, or 2.6). Noise reduction Noise interference on the screen can be reduced. Select one of the following options to get smoother images. Off.......... Disabled. L 1.......... Lower reduction. L 2.......... Higher reduction. Progressive An interlaced video signal can be displayed in progressive mode. Select one of the following options. Off.......... Disabled. L 1.......... For an active picture. L 2.......... For a still picture. Film........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures. Store To store the adjusted data, select Store and press the Point 8 button or the SELECT button. Use the Point ed buttons to select one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select Yes. Stored data can be called up by selecting an Image (1-4) in the Image Mode Selection on page 43. Store Menu A confirmation box appears and then select Yes. 4Note: • Noise reduction and Progressive can not be selected when the input signal is 480p, 575p, 720p or 3D mode is set to On. • Film of Progressive cannot be selected when the input signal is 1080i. • When 480i, 575i, 480p, 575p,720p or 1080i is selected in computer source, the items of Image adjustment are the same as the items in video source, except for Color and Tint. 45