Sanyo PDG-DWL2500 Owners Manual - Page 34
Manual PC adjustment, PC adjust Menu - specifications
![]() |
UPC - 086483079061
View all Sanyo PDG-DWL2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Computer Input Manual PC adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select PC adjust and then press the Point 8 or the SELECT button. PC adjust Menu 2 Use the Point ed buttons to select the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value. Fine sync Use the Point 7 8 buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31). Total dots Use the Point 7 8 buttons to adjust the number of total dots in one horizontal period to match your PC image. Horizontal Use the Point 7 8 buttons to adjust the horizontal picture position. Vertical Use the Point 7 8 buttons to adjust the vertical picture position. Current mode Press the SELECT button to show H-sync freq. and V-sync freq. of the connected computer. Clamp Use the Point 7 8 buttons to adjust the clamp level. When the image has dark bars, try this adjustment. 4Note: Fine sync and Total dots cannot be selected when the input signal is 480i, 480p, 575i, 575p, 720p or 1080i. 34
![](/manual_guide/products/sanyo-pdgdwl2500-owners-manual-520cdf7/34.png)