Sanyo PLC-XD2200 RS232C Basic - Page 16

PLC-XD2200 / 2600 Basic Serial Command Specifications 6.34. Direct on Setting Command Command "C28" [CR] Detail Enable Direct on function. This status is stored in EEPROM and retained regardless of Power OFF/ON. Acceptable [ACK] [CR] Response Unacceptable " "[CR] 6.35. Direct on Cancel Command Command "C29" [CR] Detail Cancel Direct on function. This status is stored in EEPROM and retained regardless of Power OFF/ON. Acceptable [ACK] [CR] Response Unacceptable " "[CR] 6.36. Power Management Ready Command Command "C2A" [CR] Detail Set Power Management to Ready mode. This status is stored in EEPROM and retained regardless of Power ON/OFF. Acceptable [ACK] [CR] Response Unacceptable " "[CR] 6.37. Power Management OFF Command Command "C2B" [CR] Detail Set Power Management to OFF mode. This status is stored in EEPROM and retained regardless of Power ON/OFF. Acceptable [ACK] [CR] Response Unacceptable " "[CR] 6.38. Power Management Shut down Command Command "C2E" [CR] Detail Set Power Management to Shut down mode. This status is stored in EEPROM and retained regardless of Power OFF/ON. Acceptable [ACK] [CR] Response Unacceptable " "[CR] 6.39. D.ZOOM + Command Command "C30" [CR] Detail Enter Digital Zoom mode and expand image size. This command works the same way as "D.ZOOM ▲" button of the remote control. Acceptable [ACK] [CR] Response Unacceptable " "[CR] 15/23