Sanyo PLC-XD2200 RS232C Basic - Page 21
Details of Response], 00 [CR], 80 [CR], 40 [CR], 20 [CR], 10 [CR], 28 [CR], 88 [CR]
UPC - 086483078644
View all Sanyo PLC-XD2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
PLC-XD2200 / 2600 Basic Serial Command Specifications [Details of Response] "00" [CR] Status : Power ON Normal image is on the screen. "80" [CR] Status: Standby When the status is Standby, Status Read Commands are always acceptable, but Functional Execution Commands are not acceptable except POWER ON Command. "40" [CR] Status: Countdown in process When "Display" in Setting Menu is ON and POWER ON is executed, it starts Countdown. When "Display" in Setting Menu is OFF, processing Countdown is not executed and the status quickly moves to Power ON. "20" [CR] Status: Cooling Down in process When the status is Power ON, and POWER OFF Command ("C01"[CR]) is executed, it moves to Cooling Down status. This status automatically moves to Standby after lamp turns off and the fan spin finishes after about 90 seconds. The fan spin time depends on a model. This function is used to cool down the lamps and other optical parts and is quite important for projector's reliability. During this time, Functional Execution Commands are invalid. "10" [CR] Status: Power Failure When the power supply voltage inside the projector reaches abnormal status, the projector is automatically turned off. The projector returns "10"[CR], which shows it moves to Power OFF status due to power failure. Fan also stops unlike Cooling Down status. "28" [CR] Status: Cooling Down in process due to Temperature Anomaly When the inside temperature is out of the operating temperature, it automatically starts Cooling Down. Response for this status is "28"[CR]. Even if the temperature decreases during this process, Cooling Down is executed. "88" [CR] Status: Coming back after temperature anomaly When the status moves to Standby after Cooling Down due to temperature anomaly, it returns "88" [CR]. This shows that the status turns to Standby because of abnormal temperature. This status maintains until next operation is done. When Power On is executed, the 20/23