Sanyo PLC-XP57L User Manual - Page 56
yellow, green, projector cannot be turned on until the cooling process is
View all Sanyo PLC-XP57L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
APPENDIX Indicators LAMP WARNING REPLACE TEMP. yellow red READY green ✽ LAMP Projector Condition red The projector is in cooling mode. It cannot be turned on until the READY indicator lights green. The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, disconnect the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause electric shock or a fire hazard. ✽ The projector is in the Power management mode. ✽ ✽ The temperature inside the projector is abnormally high. The lamp cannot light up. (The projector is preparing for stand-by or the projection lamp is in cooling mode. The projector cannot be turned on until the cooling process is completed.) The lamp cannot light up. (The lamp has been cooled down enough and the projector is in stand-by mode and ready to be turned on with the POWER ON-OFF button.) The projection lamp reaches its end of life. Replace the lamp and then reset the Lamp replacement counter. The indicator is turned off. • • • on • • • blinking • • • dim • • • off *When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the Lamp replacement counter after replacing the lamp. 56