Sanyo PLC-XP57L User Manual - Page 7
Preparation, Name Of Each Part Of Projector - owners manual
View all Sanyo PLC-XP57L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
PREPARATION NAME OF EACH PART OF PROJECTOR FRONT OF CABINET SPEAKERS PROJECTION LENS ✽ ✽ optional CAUTION Do not turn on the projector with the lens cap attached. High temperature from light beam may damage the lens cap and result in fire hazard. TOP CONTROLS AND INDICATORS AIR INTAKE VENT INFRARED REMOTE RECEIVER BACK OF CABINET EXHAUST VENT POWER CORD CONNECTOR TERMINALS AND CONNECTORS INFRARED REMOTE RECEIVER HOT AIR EXHAUSTED ! Air blown from the exhaust vent is hot. When using or installing the projector, the following precautions should be taken. ● Do not put a flammable object near this vent. ● Keep the rear grills at least 3.3' (1 m) away from any object, especially from heatsensitive objects. ● Do not touch this area, especially screws and metallic parts. This area will become hot when the projector is in use. This projector detects internal temperature and automatically controls operating power of the cooling fans. BOTTOM OF CABINET LAMP COVER When attaching the PJ-Net Organizer (optional) to the projector, remove the these parts. Refer to the owner's manual of the optional PJ-Net organizer. CARRYING HANDLE AIR INTAKE VENTS This projector is equipped with cooling fans for protecting from overheating. Pay attention to the following matters to ensure proper ventilation and avoid a possible risk of fire and malfunction. ● Do not cover the vent slots. ● Keep this side clear of any objects. Obstructions may block cooling the air. ADJUSTABLE FEET AND FEET LOCK LATCHES 7