Sanyo PLC-XT11 Owners Manual - Page 16

BEFORE OPERATION TOP CONTROLS AND INDICATORS This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top. TOP CONTROLS AND INDICATORS LAMP REPLACE INDICATOR Turns yellow when the life of the projection lamp draws to an end. (P38) WARNING TEMP. INDICATOR Flashes red when internal projector temperature is too high. (P41) READY INDICATOR Lights green when the projector is ready to be turned on. And it flashes green in Power Management mode. (P37) LAMP INDICATOR Becomes dim when the projector is turned on. And it is bright when the projector is in stand-by mode. POINT (VOLUME + / - ) BUTTONS Used to select an item or adjust value in ON-SCREEN MENU. They are also used to pan the image in DIGITAL ZOOM +/- mode. (P30) POINT LEFT/RIGHT buttons are also used as VOLUME +/- buttons. (P21) INPUT BUTTON Used to select input source. (P22, 31) IMAGE BUTTON Used to select image level. (P28, 33) ZOOM BUTTON Used to adjust zoom. (P20) FOCUS BUTTON Used to adjust focus. (P20) 16 ON-OFF SELECT KEYSTONE POWER ON-OFF BUTTON Used to turn the projector on or off. (P19) SELECT BUTTON Used to execute the item selected. It is also used to expand / compress the image in DIGITAL ZOOM mode. (P30) MENU BUTTON Used to open or close MENU operation. (P17, 18) AUTO PC ADJ. BUTTON Use to operate AUTO PC Adjustment function. (P25) KEYSTONE BUTTON Used to correct keystone distortion. (P20, 36) LENS SHIFT BUTTON Used to select LENS SHIFT function. (P20)