Sanyo PLC XT20 Owners Manual - Page 27
How to Operate the On-Screen Menu, Top Control, On-Screen Menu, Remote Control
UPC - 086483065187
View all Sanyo PLC XT20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. 1 Press the MENU button on the top control or the remote control to display the On-Screen Menu. 2 Use the Point 7 8 buttons to select a Menu icon. Use the Point ed buttons to select an item to in the selected menu. 3 Press the SELECT button to show the item data. Use the Point 7 8 buttons to adjust the values. To close the On-Screen Menu, press the MENU button again. ✔Note: •The selected item is not active until the SELECT button is pressed. Basic Operation Top Control Remote Control MENU button POINT buttons SELECT button POINT buttons MENU button On-Screen Menu SELECT button Menu icon Menu bar Pointer (red frame ) Pointer (red frame ) Press the Point ed buttons to move the pointer. Item SELECT button Item data Press the Point 7 8 buttons to adjust the value. Quit Exit this menu. 27