Sanyo PLC XT20 Owners Manual - Page 51
Screen Size Adjustment (Computer Signals), For zooming in and out the images - resolution
UPC - 086483065187
View all Sanyo PLC XT20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Screen Adjustment Screen Size Adjustment (Computer Signals) Select the desired screen size that conforms to the input signal source. Normal Provide the image to fit the screen size. True Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point ed7 8 buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear. Screen Menu Screen Menu icon Move the red frame pointer to the desired function and press the SELECT button. Wide Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16:9. Full screen Provide the full screen image. For zooming in and out the images Digital zoom + Select Digital zoom +. The On-Screen Menu disappears and "D. zoom +"appears. Press the SELECT button to expand the image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. You can also enter the Digital zoom + mode by pressing the D.ZOOM button on the remote control. Digital zoom - Select Digital zoom -. The On-Screen Menu disappears and "D. zoom -" appears. Press the SELECT button to compress image size. You can also enter the Digital zoom - mode by pressing the D.ZOOM button on the remote control. To exit the Digital zoom +/- mode, press any button except the D.ZOOM, SELECT, and Point buttons. To return to the previous screen size, select a screen size from the Screen Menu or select an input source from the Input Menu (p.35) again, or adjust the screen size with the D.ZOOM buttons on the remote control. ✔Notes: •The projector cannot display any resolution higher than 1600 x 1200. If your computer's screen resolution is higher than that, lower the resolution before connecting to the projector. •The image data other than 1024 x 768 is modified to fit the screen size in initial mode. •True, Full screen, and Digital zoom +/- cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.38). •The panning function may not be operated properly if the stored Mode in the PC Adjust Menu is used (pp.39-41). •The minimum compression ratio can be limited depending on the input signal or when the Keystone function is working. •Digital zoom +/- cannot be selected when Full screen or True is selected. •The Screen Menu cannot be operated when 720p, 1035i, or 1080i is selected in the PC System Menu (p.38). 51