Sanyo PLC XT20 Owners Manual - Page 73
Indicators and Projector Condition
UPC - 086483065187
View all Sanyo PLC XT20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Indicators and Projector Condition Check the indicators for the projector condition. WARNING TEMP. indicator Indicators POWER green LAMP red WARNING TEMP. red Projector Condition The projector is off. (The AC power cord is unplugged.) Appendix The projector is in stand-by mode. Press the ON/STAND-BY button to turn on the projector. POWER, LAMP, WARNING TEMP., WARNING FILTER, and LAMP REPLACE indicators are blinking all together. The projector is operating normally. The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the POWER indicator stops blinking and the projector can be turned on. (The WARNING TEMP. indicator keeps blinking.) Check and clean the filter. The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING TEMP. indicator stops blinking. Check and clean the filter. The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed and the POWER indicator stops blinking. The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center. Do not leave the projector on. It may cause an electric shock or a fire hazard. The projector is in the Power management mode. • • • lighting • • • blinking • • • off 73