Sanyo PLC XT20 Owners Manual - Page 76
Notes, PC Adjust Menu cannot be selected when Input 1 [RGB PC digital] is selected in the Input Menu.
UPC - 086483065187
View all Sanyo PLC XT20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Appendix When an input signal is digital from the DVI terminal, refer to the chart below. PC Adjust Menu cannot be selected when Input 1 [RGB (PC digital)] is selected in the Input Menu. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA 1 D-WXGA 2 D-WXGA 3 D-WXGA 4 D-WXGA 5 D-WXGA 6 D-WXGA 7 D-WXGA 8 RESOLUTION 640 x 480 640 x 480 768 x 575 800 x 600 1024 x 768 1366 x 768 1360 x 768 1376 x 768 1360 x 768 1368 x 768 1280 x 768 1280 x 768 1280 x 768 H-Freq. (KHz) 31.47 31.47 31.25 37.879 43.363 48.36 47.70 48.36 56.16 46.50 47.776 60.289 68.633 V-Freq. (Hz) 59.94 59.88 50.00 60.32 60.00 60.00 60.00 60.00 72.00 50.00 59.87 74.893 84.837 ON-SCREEN DISPLAY D-SXGA 1 D-SXGA 2 D-SXGA 3 D-SXGA+ 1 D-720p D-1035i D-1080i D-1080i RESOLUTION 1280 x 1024 1280 x 1024 1280 x 1024 1400 x 1050 1280 x 720 1920 x 1035 1920 x 1080 1920 x 1080 H-Freq. (KHz) 63.98 60.276 31.65 63.97 45.00 33.75 33.75 28.125 V-Freq. (Hz) 60.02 58.069 29.8 60.19 60.00 60.00 (Interlace) 60.00 (Interlace) 50.00 (Interlace) ✔Notes: •When the input signal is D-SXGA 1, D-SXGA 2, and D-SXGA 3, images may not be displayed properly depending on computers •Specifications are subject to change without notice.. 76