Sanyo R227 Owners Manual - Page 14

Steps for connecting your radio to your wireless network Step 1-Power up the radio First, connect the AC power. In use, the radio can be switched on or off with the standby button, the display on the front of the radio will light up and say: SANYO After a few seconds, this will change to show: Initializing network After a few seconds, this will change to show: < Scan for networks > Enter network View Config Step 2 Scan for a wireless network connection When the display says, press the SELECT button. (Note: if you make a mistake at any point, press the BACK button to go back to the previous screen.) The radio will now scan for all available wireless networks and will display: Scanning If it can't find one then the display will say: No networks Found If this happens then you will have to get your wireless access point working. See the instructions supplied with it. When the radio finds your wireless network, it displays the ESSID for the access point on the screen this is a name that is allocated to the access point by the person who set up the network for example: < My Home Network > US-12