Sanyo R227 Owners Manual - Page 15
Sanyo R227 - Network Audio Player Manual
![]() |
UPC - 086483072871
View all Sanyo R227 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
It is possible, and in some locations highly likely, that your radio will find more than one wireless access point, in which case you can choose which one you want to connect to. Turn the knob on the radio to see the ESSID of each access point the radio has found. Step 3 Connect to the wireless network When the ESSID for the access point you want is displayed on the screen, press the SELECT button. If your network is not configured to need an encryption code, the screen should say: Then: Connecting to network If the screen displays either: Network OK Enter WEP key Or: Enter WPA key Then the network is using one of the encryption systems: Wired Equivalent Privacy (WEP) or WiFi Protected Access (WPA). You therefore need to enter the correct WEP or WPA code or "Key" into the radio to get it to communicate with your network. Only the person who set up the network in the first place knows this code; if that person is not you then you need to find out what it is. After 3 seconds, the display goes into the code entry mode. To enter the code, use the knob to select each character of the code in turn, pressing the SELECT button after each character. Note that WEP and WPA codes are sensitive to upper and lower case characters so you must enter them exactly. Use the BACK button to erase incorrect characters. After the final character, use the knob to select the character and press the SELECT button. The radio should now be able to connect to the network. If the display shows "Invalid key" or "Network Error", an incorrect password has probably been entered. US-13
![](/manual_guide/products/sanyo-r227-owners-manual-f16e17b/15.png)