Sanyo VPC-C4 User Manual - Page 166
Shooting, monitor, Viewing, images, Problem, Cause, Action
View all Sanyo VPC-C4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
TROUBLESHOOTING Problem Cause Shooting LCD monitor When zooming in or out, the zoom movement stops momentarily. There is noise in the captured image. No playback image appears. The image is too dark. The optical zoom has moved to the maximum magnification position. The ISO sensitivity setting is too high. The main switch is not set to PLAY. The flash was blocked by a finger or other object. Viewing images The subject was too far away. The subject was lit from behind. There is not enough light. Action Not a malfunction. Release the zoom switch, and press it again. Set the ISO sensitivity to a lower setting. Reference page 51 81 Set the main switch to PLAY. 55 Hold the camera correctly, and make sure the 44 flash is not obstructed. Capture the image in the range of 176 operation of the flash. Use the forced flash mode. 72 Use the exposure correction 52 function. Adjust the ISO sensitivity 81 setting. 165 English