Sanyo VPC-C4 User Manual - Page 39
Install the card
View all Sanyo VPC-C4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
3 Close the battery cover. h Match the [I] marks, and slide the cover towards the front to close it. h At the time of purchase the battery pack is not charged. Be sure to install a fully charged battery pack in the camera (page 35). Install the card 1 Open the monitor unit, and then open the card cover on the bottom of the camera. h If the camera is on, press the ON/ OFF button for at least 1 second to turn off the camera. 2 Insert the card. h Firmly insert the card until it clicks into place. h To remove the card, press it down, and then release. The card will protrude slightly, and you can then pull it out. ON/OFF button English 38
English
38
3
Close the battery cover.
h
Match the [
I
] marks, and slide the
cover towards the front to close it.
h
At the time of purchase the battery
pack is not charged. Be sure to
install a fully charged battery pack
in the camera (page 35).
Install the card
1
Open the monitor unit, and then
open the card cover on the bottom
of the camera.
h
If the camera is on, press the ON/
OFF button for at least 1 second to
turn off the camera.
2
Insert the card.
h
Firmly insert the card until it clicks
into place.
h
To remove the card, press it down,
and then release. The card will
protrude slightly, and you can then
pull it out.
ON/OFF
button