Schwinn 430 Elliptical Assembly Manual - Page 15
Step 6 Install Right and Left leg
View all Schwinn 430 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ASSEMBLY INSTRUCTIONS Step 6 Install Right and Left leg Parts: • Right Leg (Ref R) • Left Leg (Ref S) Tools Supplied Combo Wrench 6-1 Attach the Right leg (Ref S), marked with an "R" sticker that can be removed, to the post on the Crank (Ref C1) using one M8x20L hex head thread lock (Ref 10) one M8 washer locking (Ref 5) and one M8 washer wide (Ref 4). 6-2 Repeat the procedure for the Left Leg (Ref R) marked with an "L" sticker that can be removed. 6-3 Place a Round Cover (Ref J) over the head of each bolt. Note: Make sure the wheels on the Legs are properly seated in the Extrusion Assembies. If not, they legs may have been reversed. JS 54 10 C1 R J 12
ASSEMBLY INSTRUCTIONS
12
Step 6 Install Right and Left leg
Parts:
•
Right Leg (Ref R)
•
Left Leg (Ref S)
Tools:
• Supplied Combo Wrench
6-1
Attach the Right leg (Ref S), marked with an “R” sticker that can
be removed, to the post on the Crank (Ref C1) using one M8x20L
hex head thread lock (Ref 10) one M8 washer locking (Ref 5) and
one M8 washer wide (Ref 4).
6-2
Repeat the procedure for the Left Leg (Ref R) marked with an“L”
sticker that can be removed.
6-3
Place a Round Cover (Ref J) over the head of each bolt.
Note:
Make sure the wheels on the Legs are properly seated in
the Extrusion Assembies. If not, they legs may have been
reversed.
R
S
C1
J
J
10
5
4