Seagate 600 SSD Seagate 600 SSD Product Manual - Page 15

2.8 ENVIRONMENTAL SPECIFICATIONS 2.8.1 Temperature Temperature is defined as the drive's internal temperature as reported by SMART attribute 194 for operation or the drive case temperature for non-operating. Above 1000 feet (305 meters), the maximum temperature is derated linearly to 112°F (44°C) at 10,000 feet (3048 meters). Operating: Nonoperating: 0° to 70°C (32° to 158°F) -40° to 75°C (-40° to 167°F) 2.8.2 Temperature gradient Operating: Nonoperating: 20°C per hour (30°F per hour max), without condensation 20°C per hour (30°F per hour max) 2.8.3 Humidity 2.8.3.1 Relative humidity Operating: Nonoperating: 5% to 95% noncondensing (20% per hour max) 5% to 95% noncondensing (20% per hour max) 2.8.3.2 Wet bulb temperature Operating: Nonoperating: 29°C (84°F max) 29°C (84°F max) 2.8.4 Altitude ** Operating: -61 m to 3048 m (-200 ft. to 10,000+ ft.) ** Nonoperating: -61 m to 12,192 m (-200 ft. to 40,000+ ft.) ** Applies to atmospheric pressure only. 2.8.5 Shock All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis. 2.8.5.1 Operating shock These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 1500 Gs based on half-sine shock pulse s of 0.5ms. This specification does not cover connection issues that may result from testing at this level. 2.8.5.2 Nonoperating shock The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 1500 Gs based on a half-sine shock pulse of 0.5ms duration. 2.8.6 Vibration All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis. SEAGATE 600 SSD PRODUCT MANUAL, REV. B 11