Seagate GoFlex Net User Guide - Page 4

About the GoFlex Net Media Sharing Device GoFlex Drive Docks LED Capacity Gauges Figure 1: GoFlex Net - Front View • FreeAgent GoFlex drive docks: Convenient dock for your FreeAgent GoFlex drives. • LED: The light on the front provides information about the device's current state and notifies you when you have a message. - Green blinking: GoFlex Net is starting up. - Green solid: the device is on and connected to the service. - Amber solid: GoFlex Net started but failed to connect to the service; no Internet connection. - Yellow blinking: There is a message for you. Sign in to your account to read the message. • Capacity gauges: The lights provide a real-time display of available drive capacity. The lights turn on, from bottom to top, when the docked GoFlex drive reaches a percentage of capacity, as follows: - Light 1 (bottom) is on: 0-25% full - Lights 1 and 2 on: 26-50% full - Lights 1, 2 and 3 on: 51-85% full - Lights 1-4 on: 86-100% full - The lights are off if there is no drive docked in one of the slots. See "Safely Removing Drives From GoFlex Net" on page 11 for instructions on removing a GoFlex drive from a slot. 6 USB Port Ethernet Port Reset Power Figure 2: GoFlex Net - Rear View • Power: Connects GoFlex Net to a DC 12V power source. • Reset button: Press this button if you need to restart GoFlex Net (normally not necessary). Insert a paper clip or other narrow device, and then press and release the button. The light on the front blinks for about 40 seconds and then returns to solid green. • Gigabit Ethernet port: Connects GoFlex Net to your router. • USB port: Connect any USB 2.0 drive or other USB mass storage device. 7