Seagate ST3300457FC Cheetah 15K.5 SCSI Product Manual - Page 12
General description
View all Seagate ST3300457FC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
4.0 General description Cheetah 15K.5 SCSI drives combine Tunneling Magnetoresistive (TMR) heads and a wide Ultra320 SCSI interface to provide high performance, high capacity data storage for a variety of systems including engineering workstations, network servers, mainframes, and supercomputers. Ultra320 SCSI uses negotiated transfer rates. These transfer rates will occur only if your host adapter supports these data transfer rates and is compatible with the required hardware requirements of the I/O circuit type. This drive also operates at SCSI-1 and SCSI-2 data transfer rates for backward compatibility with non-Ultra/Ultra2/ Ultra160/Ultra320 SCSI host adapters. Table 1 lists the features that differentiate the Cheetah 15K.5 SCSI models. Table 1: Drive model number vs. differentiating features Model number ST3300655LW ST3146855LW ST373455LW ST3300655LC ST3146855LC ST373455LC Number of active heads 8 4 2 8 4 2 I/O circuit type [1] Single-ended (SE) and low voltage differential (LVD) Single-ended (SE) and low voltage differential (LVD) Number of I/O connector pins 68 80 [1] See Section 10.6 for details and definitions. The drive records and recovers data on approximately 70 mm non-removable discs. The drive supports the Small Computer System Interface (SCSI) as described in the ANSI SCSI interface specifications to the extent described in this manual (volume 1), which defines the product performance characteristics of the Cheetah 15K.5 SCSI family of drives, the Parallel SCSI Interface Manual, part number 100293069, and the SCSI Commands Reference Manual, part number 100293068, which describe the general interface characteristics of this and other families of Seagate SCSI drives. The drive's interface supports multiple initiators, disconnect/reconnect, self-configuring host software, and logical block addressing. The head and disc assembly (HDA) is sealed at the factory. Air circulates within the HDA through a nonreplaceable filter to maintain a contamination-free HDA environment. Never disassemble the HDA and do not attempt to service items in the sealed enclosure (heads, media, actuator, etc.) as this requires special facilities. The drive contains no replaceable parts. Opening the HDA voids your warranty. Cheetah 15K.5 SCSI drives use a dedicated landing zone at the innermost radius of the media to eliminate the possibility of destroying or degrading data by landing in the data zone. The drive automatically goes to the landing zone when power is removed. 6 Cheetah 15K.5 SCSI Product Manual, Rev. J