Sennheiser HDV 820 HDV 820 Instruction manual - Page 10

Sound menu

Page 10 highlights

Putting the HDV 820 into operation A Connection possibility of the audio source: digital, USB connection USB ~100-240 VAC 50/60Hz BAL UNBAL OPT USB BAL R L R - GAIN + ANALOG IN COAX DIGITAL IN R L ANALOG OUT Connection cable: USB 2.0 certified cable with Type B connector for connection to the headphone amplifier ▷ More information on using the headphone amplifier connected to a Mac or PC can be found on page 12. For best signal transmission and audio quality, use a USB OTG cable (USB On-the-Go; available from your specialist dealer) to connect your mobile HiRes audio player or smartphone. B C Requirements for digital connections The digital audio inputs DIGITAL IN (OPT or COAX) can receive digital audio signals in PCM format (supported sampling rates: optical: up to 96 kHz, coaxial: up to 192 kHz). Information on how to set the audio signal of the connected device to PCM can be found in the Sound or Settings menu or in the instruction manual of your device. If an incompatible digital audio signal is being received, the Input selection LED (OPT or COAX) lights up white and the DSD reproduction LED flashes white. Music cannot be reproduced. Sound menu* Digital sound PCM Bitstream * The appearance of the Sound menu can vary depending on the device you are using. 10 | HDV 820

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

Putting the HDV 820 into operation
10
|
HDV 820
Connection possibility of the audio source: digital,
USB connection
More information on using the headphone amplifier connected to
a Mac or PC can be found on page 12.
Requirements for digital connections
The digital audio inputs DIGITAL IN (
OPT
or
COAX
) can receive digital
audio signals in PCM format (supported sampling rates: optical: up
to 96 kHz, coaxial: up to 192 kHz).
Information on how to set the audio signal of the connected device
to PCM can be found in the Sound or Settings menu or in the instruc-
tion manual of your device.
If an incompatible digital audio signal is being received, the
Input
selection
LED (
OPT
or
COAX
) lights up white and the
DSD reproduc-
tion
LED flashes white. Music cannot be reproduced.
* The appearance of the Sound menu can vary depending on the
device you are using.
A
For best signal transmission and audio quality, use a USB OTG
cable (USB On-the-Go; available from your specialist dealer) to
connect your mobile HiRes audio player or smartphone.
ANALOG OUT
~100-240 VAC 50/60Hz
R
L
R
L
R
ANALOG IN
DIGITAL IN
- GAIN +
BAL
UNBAL
BAL
OPT
USB
USB
COAX
Connection cable: USB 2.0 certified cable with Type B connector
for connection to the headphone amplifier
B
C
Sound menu*
Digital sound
Bitstream
PCM