Sennheiser HDV 820 HDV 820 Instruction manual - Page 16

Putting the HDV 820 into operation Status Tab Control Panel view Using the Sennheiser Control Panel The Control Panel allows you to configure the HDV 820 for the reproduction of high-resolution music files and to monitor the current operating state. Display/Setting option USB Audio device Currently connected and used device. If several devices devices are connected simultaneously, you can select the desired device here. Current sample rate PCM: 44100, 48000, 88200, 96000, 176400, 192000, 352800, 384000 Hz DSD: 2822400, 5644800, 11289600 Hz Buffer settings USB streaming mode The buffer of the USB streaming mode controls the latency of the music signal from the file source (PC client) and the DAC (HDV 820). The lower the latency, the more CPU power the PC client has to allocate to this process. Recommended setting: "Reliable". ASIO buffer size The ASIO buffer size controls the data transfer between the driver and the playback software. The ASIO buffer size depends on the buffer of the USB streaming mode. Recommended setting: "Auto". Current state Information on the PC client on which the Control Panel is installed and on the streaming state ("Active" or "Stopped"). The type of driver used is displayed via the number of active WDM or ASIO clients. Client information Device information/Driver information Information on the currently connected device and the driver. Information 16 | HDV 820