Sennheiser TeamConnect Ceiling 2 ES1 Ceiling Audio Solution TeamConnect Ceilin - Page 3

Application Guide ES-1 Audio System Set-up Guide for Microsoft Teams The Bose ES1 Ceiling Audio Solution is Microsoft Teams certified as part of a complete system solution that includes the following components: Bose ControlSpace EX-440C Bose PowerSpace P2600A (includes AmpLink cable) Bose EdgeMax EM180 Sennheiser TeamConnect Ceiling 2 (TCC2) Additional components required, but not included: Microsoft Teams Room camera and display Network switch with PoE for Dante and ControlSpace configuration Windows computer with ControlSpace Designer 5.8.2 or later, Sennheiser Control Cockpit, and Dante Controller. (The computer is required for adjustments only and can be disconnected after use.) System Diagram The system diagram for ES1 appears below. Components in the background (such as Microsoft Teams Room [MTR] components, camera, and network switch with PoE) are required but are outside the scope of ES1. Figure 1: ES1 System Wiring Diagram Microphone and Loudspeaker Placement EdgeMax EM180 includes patented PhaseGuide technology, which produces an asymmetrical dispersion pattern that directs audio down and forward (see Figure 2). Placement in the ceiling above the display draws participant attention toward the front of the room during a video conference. Audio disperses wall-to-wall, at 180 degrees, horizontally (see Figure 3). This directionality requires that the PhaseGuide is properly oriented during installation. Wire the EM180 for 8Ω (low-Z). Refer to the EdgeMax EM90 & EM180 installation guide for proper installation instructions. April 2020 Page 1