Sennheiser TeamConnect Ceiling 2 ES1 Ceiling Audio Solution TeamConnect Ceilin - Page 5
Application Guide, Amplifier with AmpLink, AmpLink Input, Input Select
View all Sennheiser TeamConnect Ceiling 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Application Guide ES-1 Audio System Set-up Guide for Microsoft Teams 10ft ceiling Figure 4: Plan view showing the relative placement of TCC2 and EM180. The ES1 base configuration, including one EM180 loudspeaker, is optimized for a 20-foot (6.1meter) conference room where the farthest listener is 14 feet (4.5 meters) away from the loudspeaker. The TCC2 should be positioned to provide a line-of-sight path to each seat at the table and should be no more than 11.5 feet (3.5 meters) from the farthest presenter. Amplifier with AmpLink P2600A is a two-channel versatile amplifier with 600 watts per channel and the ability to assign high-Z and low-Z operation. AmpLink is a proprietary near-zero-latency link between Bose processors and amplifiers and can carry up to eight channels of digital audio on a single shielded Category 5 (STP) cable. Connect the DSP and the AmpLink Input port on the amplifier as shown in (1) in Figure 5. The transmit channel is assigned within the AmpLink output block of the signal processor. On the amplifier-side, the appropriate receive channel is selected using the Input Select dial (2) set to the appropriate transmit channel. Turn the dial to 2 to select the first two Amplink channels. The odd-number channel is assigned to Output 1 and the even channel is assigned to Output 2 (4). A 3-foot (1-meter) AmpLink cable is included with the amplifier. 4 3 2 1 Figure 5: Back panel view of the amplifier with important elements identified. April 2020 Page 3