Sennheiser ew 300 IEM G2 Instructions for Use - Page 85
Specifications
View all Sennheiser ew 300 IEM G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Specifications System RF characteristics Modulation Frequency ranges Transmission/receiving frequencies Switching bandwidth Nominal/peak deviation Frequency stability AF characteristics Noise reduction system AF frequency response MPX pilot tone (frequency/deviation) S/N ratio (at 1 mV and peak deviation) THD (at nominal deviation and 1 kHz) General data Temperature range Dimensions of carrying case [mm] Weight of carrying case wideband FM stereo, MPX pilot tone 518-554, 572-608, 626-662, 740-776, 786-822, 830-866 MHz 8 channel banks with up to 12 factory-preset channels each 1 channel bank with up to 12 freely selectable channels (1,440 frequencies, tunable in steps of 25 kHz) 36 MHz ± 24 kHz/± 48 kHz ≤ ± 15 ppm Sennheiser HDX 40-15,000 Hz 19 KHz/±4 kHz ≥ 91 dB(A) ≤ 0,9 % -10 °C to +55 °C (with SR 350 IEM G2: -10 °C to +45 °C) 380 x 370 x 70 approx. 3 kg IE 4 earphones Frequency response Max. SPL Impedance 40-20,000 Hz 106 dB (1 kHz, 1 mW) 16 Ω EK 300 IEM G2 receiver RF characteristics Receiver principle Sensitivity (with HDX, peak deviation) Adjacent channel rejection Intermodulation attenuation Blocking Squelch Pilot tone squelch (MPX pilot tone) non diversity < 2.5 μV at 52 dBArms S/N ≥ 70 dB ≥ 70 dB ≥ 80 dB 4 steps: OFF LO: 5 dBμV MID: 15 dBμV HI: 25 dBμV can be switched off AF characteristics Headphone output 3.5 mm jack socket AF output voltage (peak deviation, 1 kHzAF) PHONES 2 x ≥ 100 mW at 32 Ω Overall device Power supply Nominal voltage Max. power consumption at nominal voltage Power consumption with switched-off receiver Operating time (with batteries) Operating time (with BA 2015 accupack) Dimensions [mm] Weight (incl. batteries) 38 2 AA size batteries, 1.5 V 2.4 V approx. 190 mA (2 x 30 mW) ≤ 250 μA 6-10 hrs (depending on volume level) 6-10 hrs (depending on volume level) 82 x 64 x 24 approx. 170 g