Sennheiser ew 300 iem Instructions for Use - Page 49
Configuring a channel preset
View all Sennheiser ew 300 iem manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Configuring a channel preset Transmitter and receiver of the evolution wireless system ew 300 IEM have 8 switchable frequencies (channel presets) respectively to store up to 8 transmission/receiving frequencies. With the SR 300 IEM transmitter, you can additionally assign a name. DISPLAY DISPLAY TUNE Frequency CH NO Channel No. 1 NAME Name 1 TUNE Frequency CH NO Channel No. 2 NAME Name 2 TUNE Frequency CH NO Channel No. 3 NAME Name TUNE Frequency CH NO Channel No. 8 NAME Name 3 ... 8 You can switch directly between the channel presets (u "Selecting the frequency, channel number"). TUNE tune Setting the transmission/receiving frequency Transmission and receiving frequencies are tunable in 25-kHz steps within a switching bandwidth of 32 MHz max. Special notes on multi-channel operation: Several devices of the Sennheiser evolution wireless system ew 300 IEM can be used simultaneously on different frequencies. The factory-preset frequencies are intermodulation-free. Before you program new frequency combinations, please refer to the information on the correct frequency choice given in the planning brochure "Practical Applications in RF Technology" available from your local Sennheiser agent. Ǡ Select the channel preset for which you wish to set a frequency. Ǡ Select the "TUNE" menu by pressing the SET button until "TUNE" appears on the display; after a short pause the currently set frequency is displayed. Ǡ With the ̆/̄ buttons you can now select a different frequency. The frequencies are tunable in 25-kHz steps. The new frequency starts flashing on the display and becomes effective immediately. Ǡ Press the SET button to return to the top menu level. The display then switches back to the standard display. 51