Sennheiser freePORT Instrument Set Instructions for Use - Page 4

The freePORT systems Designed for different areas of application, the freePORT systems are available in three variants. y Presentation Set: This system is ideal for presentation applications. The unobtrusive ME 2 clip-on microphone is virtually invisible. y Instrument Set: This system is for connecting musical instruments (e.g. guitar) which have a ¼" (6.3 mm) jack socket directly to the bodypack transmitter. y Vocal Set: This system is ideal for vocal and speech applications. Transmitters and receivers of the freePORT systems have four factorypreset frequencies for direct channel selection - ready for immediate use after switch-on. The freePORT systems are available in three UHF frequency ranges: y Frequency range A: y Frequency range B: y Frequency range C: y Frequency range E: 719 to 721 MHz 691 to 693 MHz 742.5 to 744.5 MHz 863 to 865 MHz Notes: Use of A, B and C frequency ranges must be licensed. Most EU countries do not require licensing for use of frequency range E. Frequency range B (691 to 693 MHz) is intended for use solely in the USA and Canada. Please be legal and observe the country-specific regulations of the licensing authorities. Sennheiser are not responsible if you operate illegally. To avoid interfering with other users, the transmitter should be switched off when not in use. Features of the freePORT systems: y Up to four transmission links per frequency range which can be operated simultaneously y Reliable transmission technology y Diversity technology for minimizing dropouts in the reception y Adjustable squelch for eliminating RF interference y Rugged housings y Crystal-clear reception due to dynamic processor 3