Sharp 3150 FO-3150 Operation Manual - Page 22
/2 position for letter or legal paper
![]() |
UPC - 074000033832
View all Sharp 3150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Loading Printing Paper 5 Insert the stack of paper firmly into the tray, print side up. • Make sure that the stack is not higher than the marked line. Loading too much paper may cause paper jams and misfeeds. • If paper remains in the tray, take it out and combine it into a single stack with the new paper before adding the new paper. Important: Be sure to load the paper so that printing takes place on the print side of the paper. Printing on the reverse side may result in poor print quality. 6 Make sure the stack of paper is aligned against the right paper guide, and then gently move the left paper guide to the 8 1/2 position for letter or legal paper, or the A4 position for A4 paper. 7 Push the paper release lever back down. • Note: If the paper does not feed correctly, remove the entire stack from the tray and repeat the loading procedure from the beginning. 8 Replace the paper tray cover. • If you loaded other than letter size paper (or you changed the paper size), change the paper size setting as explained on the following page. 20
![](/manual_guide/products/sharp-fo3150-fo3150-operation-manual-f996799/22.png)